Skip to main content
FEFCO 0201

FEFCO 0201: the standard corrugated slotted carton

One piece, delivered flat, outer flaps meet in the centre – the most widely used box style in shipping and industry.

FEFCO 0201: the standard slotted carton
Style

What is FEFCO 0201?

FEFCO 0201 belongs to series 02, the slotted-type boxes. The box consists of one blank with a manufacturer’s joint – glued, stitched or taped – and four flaps each at the bottom and top.

Closure: All flaps have the same depth – half the width of the box. As a result, the outer flaps meet in the centre; the inner flaps lie underneath.
Delivery: Folded flat, space-saving on the pallet.
Erecting: By hand or by machine (marked M/A in the FEFCO catalogue).
Material: The construction uses the sheet very efficiently, with hardly any waste.

It is usually closed with adhesive tape; depending on the packing process also with hot-melt glue or staples.

View shipping boxes
At a glance

FEFCO 0201 – key technical data

StyleSlotted-type box, series 02, one piece with manufacturer's joint
ClosureOuter flaps meet in the centre, usually sealed with adhesive tape
Typical flutesB, C or E single-wall; BC or EB for heavier goods, triple-wall for high loads
ApplicationsShipping, storage, outer packaging, spare parts, retail
AdvantagesLittle waste, cost-effective construction, stored flat, can be processed by hand and by machine
NotesInner flaps only meet with a square footprint – add a bottom pad if needed. Only one layer of board at the closure.
At WidenBOXB, C, E, F, BC, EB, BE, EE flutes and triple-wall, box size up to 2,000 × 1,000 × 1,500 mm, flexo print up to 4 / offset up to 6 colours, digital
FEFCO 0201: the standard slotted carton
FEFCO 0201: the standard slotted carton
Selection

When is FEFCO 0201 suitable – and when not?

Well suited: For most shipped and stored goods with even weight distribution, for changing formats and large quantities. Thanks to its low material use, 0201 is often the most economical solution.

Less suited: For heavy goods with point loads there is only one layer of board at the closure – here FEFCO 0203 with fully overlapping flaps is sturdier. If you want to erect quickly without taping the bottom, choose an automatic bottom (FEFCO 0711). For frequent opening and closing, a telescope box is a better fit.

How we work: Folding boxes to FEFCO and custom constructions, CAD design included, samples cut on the plotter – the first 2 samples are free for new customers. Runs from 200 units, delivery in 10–15 working days, faster depending on the situation.

Compare FEFCO 0203

Frequently asked questions about FEFCO 0201

On 0201 the outer flaps meet in the centre. On 0203 the outer flaps are as long as the box is wide and overlap completely – bottom and top are therefore double-layered and sturdier, but more material is needed.

That depends on weight, stacking height and transport route. For light to medium goods single-wall board (B, C, E) is often enough, for heavy goods double-wall (BC, EB) or triple-wall grades. We define the grade with you.

Yes. The FEFCO catalogue marks 0201 as erectable by hand and by machine (M/A). For use on your packaging machine we coordinate tolerances and the manufacturer’s joint.

Yes – flexo print up to 4 colours (also white-coated), offset print up to 6 colours or digital for smaller quantities. Inside print is also possible.

Yes. We design in CAD and cut samples on the plotter. The first 2 samples are free for new customers.

Runs from 200 units up to millions. We deliver boxes in 10–15 working days, faster depending on the situation.

Get started

Your FEFCO 0201 – made to measure, in series

Give us internal dimensions, filling weight, quantity and print requirements – we will propose flute and closure.

Zum Hauptinhalt springen