Skip to main content
FEFCO 0209

FEFCO 0209: Folding box with reduced flaps

On one closure side the flaps are lower than on the standard folding box – a variant of series 02.

FEFCO 0209: Folding box with reduced flaps
Design

What is FEFCO 0209?

FEFCO 0209 belongs to series 02, the slotted boxes. The box consists of one blank with a manufacturer’s joint – glued, stitched or taped – and flaps at the bottom and top.

Special feature: On one closure side the flap height is reduced – the flaps are shorter than on FEFCO 0201.
Flap size: How much the flaps are shortened is defined with you in CAD.
Delivery: Folded flat, space-saving on the pallet.
Erecting: By hand or by machine (marked M/A in the FEFCO catalogue).

Difference: On FEFCO 0201 all flaps are the same depth and the outer flaps meet in the middle.

View shipping boxes
At a glance

FEFCO 0209 – technical data

DesignSlotted box, series 02, one-piece with manufacturer's joint
ClosureOne closure side with reduced flap height, flap size by agreement
Typical flutesB, C or E single wall; BC or EB for heavier goods
UseApplications where full-height flaps are not needed on one side
AdvantagesShorter flaps on one side, can be stored flat, can be processed by hand and by machine
NotesAgree flap height and closure of the shortened side in advance with regard to contents and transport route
At WidenBOXFlutes B, C, E, F, BC, EB, BE, EE and triple wall, box size up to 2,000 × 1,000 × 1,500 mm, printing flexo up to 4 / offset up to 6 colours, digital
FEFCO 0209: Folding box with reduced flaps
FEFCO 0209: Folding box with reduced flaps
Selection

When is FEFCO 0209 suitable – and when not?

Well suited: When full-height flaps are not needed on one side of the box and the design should be adapted accordingly. Whether this suits your product is clarified with a sample.

Less suited: If both closure sides need full-height flaps, FEFCO 0201 is the standard choice – or FEFCO 0203 for more stability.

How we work: Folding boxes to FEFCO and custom designs, CAD design included, samples cut on the plotter – the first 2 samples are free for new customers. Runs from 200 units, delivery time 10–15 working days, faster depending on the situation.

Compare FEFCO 0201

Frequently asked questions about FEFCO 0209

On 0201 all flaps are the same depth and the outer flaps meet in the middle on both closure sides. On 0209 the flap height is reduced on one closure side.

There is no fixed dimension. We define the flap height in CAD to suit the product and application and check it with a sample.

Yes. The FEFCO catalogue marks 0209 as erectable by hand and by machine (M/A). For use on your packaging machine we align tolerances and the manufacturer’s joint.

Yes – flexo printing up to 4 colours (also on white-coated board), offset printing up to 6 colours, or digital for smaller quantities. Inside printing is also possible.

Yes. We design in CAD and cut samples on the plotter. For new customers, the first 2 samples are free of charge.

Runs from 200 units up to millions. We deliver boxes in 10–15 working days, faster depending on the situation.

Get started

Your FEFCO 0209 – made to measure, in series

Tell us the inside dimensions, filling weight, quantity and intended use – we define the flap height and flute.

Zum Hauptinhalt springen